PROMASPRAY®-F3

ADVANTAGES

  • Does not release toxic or hazardous fumes.
  • Presents no known health hazards either before, during or after application. 

PROMASPRAY®-F3

PROMASPRAY®-F3 is a spray applied, single package factory controlled premix, based on vermiculite and gypsum, for internal use.

PROMASPRAY®-F3 produces a monolithic coating able to withstand the thermal shocks experienced in a high intensity cellulosic fires. Concrete structures in particular, will be protected from explosive spalling when coated with PROMASPRAY®-F3.

Although low in density, thus significantly reducing dead load, PROMASPRAY®-F3 is highly durable and will not crack or spall under mechanical impact.

PROMASPRAY®-F3 may be applied within environments where limited exposure to the elements is likely throughout the building phase of the project, e.g. perimeter beams.

Applications

  • Structures protected with PROMASPRAY® F3 can provide fire resistance cellulosic fires for up to 240 minutes.
  • PROMASPRAY® F3 is used for application to steel and concrete frames, metal floor or roof decks, and return air plenums. It may be easily removed and reinstated locally when additional fixings are required.
Properties & Performances
< #Back#

PROPERTIES & PERFORMANCES

Color and finish Off-white, monolithic, spray texture. May be floated or roller finished
Minimum practical thickness
8mm when unreinforced, 15mm when reinforced
Theoretical coverage 172m2/tonne at 15mm thickness
Number of coats One or more as required
Cure By hydraulic set
Initial set 2 to 6 hours at 20°C and 50% RH
Density (Nominal) 360kg/m3 ± 15% (when dry and in place)
Bond impact
 No cracks or delaminations within normal code limits
Air erosion resistance
No erosion in accordance with ASTM E859
Deflection effect
No cracks or delaminations within normal code limits
Compressive strength
563kPa (81.6lb/in2) in accordance with ASTM E761
Combustibility
Non-combustible in accordance with BS476: Part 4
Smoke generation
Does not contribute to smoke generation
Thermal conductivity
0.095W/mK at 20°C
Corrosion resistance
Does not promote corrosion of steel. However, a primed substrate is recom- mended for long term corrosion resistance. See Preparation.
pH value
12.0-12.5
Fire resistance Structures protected with Promat PROMASPRAY®-F3 have undergone fire resistance tests up to 240 minutes in approved independent laboratories to recognized standards throughout the world, including:
  • UK (BS476: Parts 20-21: 1987 & EN 13501-2)
  • Germany (DIN 4102)
  • USA (ASTM E119 UL263)
  • Australia (AS1530: Part 4)
The tests also comply with International Standard ISO834.
PROMASPRAY®-F3 protected structures have been successfully cellulosic fire tested under BS476: Part 21 to failure temperatures of up to 800oC and EN 13381-4 up to 750°C. This allows the specifier the freedom to adopt a fire engineering approach to fire resistance in accordance with BS5950: Parts 3 and 8, as well as the relevant Eurocodes.
The fire resistance test results relate solely to the constructions tested and test conditions imposed. Promat provides computer based thickness calculations to meet specific fire resistance on receipt of details. See Fire Protection Thickness.

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

PROPERTIES & PERFORMANCES

Color and finish Off-white, monolithic, spray texture. May be floated or roller finished
Minimum practical thickness
8mm when unreinforced, 15mm when reinforced
Theoretical coverage 172m2/tonne at 15mm thickness
Number of coats One or more as required
Cure By hydraulic set
Initial set 2 to 6 hours at 20°C and 50% RH
Density (Nominal) 360kg/m3 ± 15% (when dry and in place)
Bond impact
 No cracks or delaminations within normal code limits
Air erosion resistance
No erosion in accordance with ASTM E859
Deflection effect
No cracks or delaminations within normal code limits
Compressive strength
563kPa (81.6lb/in2) in accordance with ASTM E761
Combustibility
Non-combustible in accordance with BS476: Part 4
Smoke generation
Does not contribute to smoke generation
Thermal conductivity
0.095W/mK at 20°C
Corrosion resistance
Does not promote corrosion of steel. However, a primed substrate is recom- mended for long term corrosion resistance. See Preparation.
pH value
12.0-12.5
Fire resistance Structures protected with Promat PROMASPRAY®-F3 have undergone fire resistance tests up to 240 minutes in approved independent laboratories to recognized standards throughout the world, including:
  • UK (BS476: Parts 20-21: 1987 & EN 13501-2)
  • Germany (DIN 4102)
  • USA (ASTM E119 UL263)
  • Australia (AS1530: Part 4)
The tests also comply with International Standard ISO834.
PROMASPRAY®-F3 protected structures have been successfully cellulosic fire tested under BS476: Part 21 to failure temperatures of up to 800oC and EN 13381-4 up to 750°C. This allows the specifier the freedom to adopt a fire engineering approach to fire resistance in accordance with BS5950: Parts 3 and 8, as well as the relevant Eurocodes.
The fire resistance test results relate solely to the constructions tested and test conditions imposed. Promat provides computer based thickness calculations to meet specific fire resistance on receipt of details. See Fire Protection Thickness.

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

Preparation & Application
< #Back#

PREPARATION


Typical substrates Unprimed and primed steel, concrete frames, metal floor/roof decks and return air plenums.
Substrate preparation The substrate shall be clean, dry and free from dust, loose millscale,
loose rust, oil and any other condition preventing good adhesion PROMASPRAY®-F3 can be applied to unprimed or primed steel work. Prior to the application, incompatible primers should be prepared by the application of CAFCO® SBR Bonding Latex used as a keycoat.
Mesh reinforcement Most fire tests conducted have been carried out without mesh reinforcement, to demonstrate the ability of PROMASPRAY®-F3 to stay in place under the most severe fire conditions. However, for maximum long term in service durability, the use of lightweight mesh reinforcement is recommended where vibration or mechanical damage and the possibility of subsequent de-bonding exist.

APPLICATION


Initial steps
Application of PROMASPRAY®-F3 must be carried out by an applicator recognized by Promat.
Methods
Mix PROMASPRAY®-F3 with potable water in a suitable mixer and apply by a spraying machine approved by Promat. PROMASPRAY®-F3 may be centrally pumped vertically or horizontally, enabling all spray plant and material storage to be contained in one area.
Limitations
PROMASPRAY®-F3 may be applied when the substrate and air temperatures are at least 2°C and rising, but should not be applied if the substrate or air temperatures are less than 4°C and falling. Maximum substrate and air temperature is 45°C.
Substrate temperature should be at least 2°C above dew point temperature.

PREPARATION


Typical substrates Unprimed and primed steel, concrete frames, metal floor/roof decks and return air plenums.
Substrate preparation The substrate shall be clean, dry and free from dust, loose millscale,
loose rust, oil and any other condition preventing good adhesion PROMASPRAY®-F3 can be applied to unprimed or primed steel work. Prior to the application, incompatible primers should be prepared by the application of CAFCO® SBR Bonding Latex used as a keycoat.
Mesh reinforcement Most fire tests conducted have been carried out without mesh reinforcement, to demonstrate the ability of PROMASPRAY®-F3 to stay in place under the most severe fire conditions. However, for maximum long term in service durability, the use of lightweight mesh reinforcement is recommended where vibration or mechanical damage and the possibility of subsequent de-bonding exist.

APPLICATION


Initial steps
Application of PROMASPRAY®-F3 must be carried out by an applicator recognized by Promat.
Methods
Mix PROMASPRAY®-F3 with potable water in a suitable mixer and apply by a spraying machine approved by Promat. PROMASPRAY®-F3 may be centrally pumped vertically or horizontally, enabling all spray plant and material storage to be contained in one area.
Limitations
PROMASPRAY®-F3 may be applied when the substrate and air temperatures are at least 2°C and rising, but should not be applied if the substrate or air temperatures are less than 4°C and falling. Maximum substrate and air temperature is 45°C.
Substrate temperature should be at least 2°C above dew point temperature.
Fire Protection Thickness
< #Back#

FIRE PROTECTION THICKNESS

The thickness of the fire protection for a given period of fire resistance in a cellulosic type fire, relates to the A/V ratio of a steel section. A/V is the ratio of the heated perimeter of the steel section exposed to fire to the cross-sectional area of the same steel section.

All column and beam sections have their own specific A/V ratio. Please consult Promat to establish the A/V ratio for a particular beam or column section. TABLES 1 to 4 ascertain the thickness of PROMASPRAY®-F3 that meets the required period of fire resistance for I-section and hollow section beams and columns.

For advice on thickness calculations for cellular beams, castellated sections, composite floors, upgrading of concrete slabs and more complex situations, please contact Promat.

Minimum thickness (mm) of PROMASPRAY®-F3 applied to I-section beams and columns


Tab 1: Critical Steel Temperature of 550°C for a fire resistance of: Tab 2: Critical Steel Temperature of 600°C for a fire resistance of:
A/V (m-1) 30 min 60 min 90 min 120 min 180 min 240 min A/V (m-1) 30 min 60 min 90  min 120 min 180 min 240 min
70 10 10 12 17 28 38 70 10 10 10 15 24 34
75 10 10 13 18 29 40 75 10 10 11 16 26 36
80 10 10 14 19 31 42 80 10 10 12 17 27 38
85 10 10 15 20 32 43 85 10 10 13 18 29 39
90 10 10 15 21 33 45 90 10 10 13 19 30 41
95 10 10 16 22 34 47 95 10 10 14 20 31 42
100 10 10 17 23 36 48 100 10 10 15 21 32 44
105 10 11 17 24 37 50 105 10 10 15 21 33 45
110 10 11 18 25 38 51 110 10 10 16 22 34 46
115 10 12 19 25 39 52 115 10 10 17 23 35 48
120 10 12 19 26 40 53 120 10 11 17 23 36 49
125 10 13 20 27 41 55 125 10 11 18 24 37 50
130 10 13 20 27 42 56 130 10 12 18 25 38 51
135 10 14 21 28 42 57 135 10 12 19 25 39 52
140 10 14 21 29 43 58 140 10 12 19 26 39 53
145 10 14 22 29 44  -  145 10 13 19 26 40 54
150 10 15 22 30 45  -  150 10 13 20 27 41 55
155 10 15 23 30 45  -  155 10 13 20 27 41 56
160 10 15 23 31 46  -  160 10 14 21 28 42 56
165 10 16 23 31 47  -  165 10 14 21 28 43 57
170 10 16 24 32 47  -  170 10 14 21 29 43 58
175 10 16 24 32 48  -  175 10 14 22 29 44  - 
180 10 16 24 32 49  -  180 10 15 22 30 45  - 
185 10 17 25 33 49  -  185 10 15 22 30 45  - 
190 10 17 25 33 50  -  190 10 15 23 30 46  - 
195 10 17 25 34 50  -  195 10 15 23 31 46  - 
200 10 17 26 34 51  -  200 10 16 23 31 47  - 
205 10 18 26 34 51  -  205 10 16 24 31 47  - 
210 10 18 26 35 52  -  210 10 16 24 32 48  - 
215 10 18 27 35 52  -  215 10 16 24 32 48  - 
220 10 18 27 35 53  -  220 10 16 24 32 48  - 
225 10 18 27 36 53  -  225 10 17 25 33 49  - 
230 10 19 27 36 53  -  230 10 17 25 33 49  - 
235 10 19 28 36 54  -  235 10 17 25 33 50  - 
240 10 19 28 37 54  -  240 10 17 25 34 50  - 
245 10 19 28 37 55  -  245 10 17 26 34 50  - 
250 10 19 28 37 55  -  250 10 17 26 34 51  - 
255 11 19 28 37 55  -  255 10 18 26 34 51  - 
260 11 20 29 38 56  -  260 10 18 26 35 51  - 
265 11 20 29 38 56  -  265 10 18 26 35 52  - 
270 11 20 29 38 56  -  270 10 18 27 35 52  - 
275 11 20 29 38 57  -  275 10 18 27 35 52  - 
280 11 20 29 39 57  -  280 10 18 27 36 53  - 
285 11 20 30 39 57  -  285 10 19 27 36 53  - 
290 11 21 30 39 58  -  290 10 19 27 36 53  - 
295 11 21 30 39 58  -  295 10 19 27 36 54  - 
300 11 21 30 39 58  -  300 10 19 28 36 54  - 
305 12 21 30 40 58  -  305 10 19 28 37 54  - 
310 12 21 30 40  -   -  310 10 19 28 37 54  - 
315 12 21 31 40  -   -  315 10 19 28 37 55  - 
320 12 21 31 40  -   -    320 11 19 28 37 55  - 

Minimum thickness (mm) of PROMASPRAY®-F3 applied to hollow section beams and columns

Tab 3: Critical Steel Temperature of 550°C for a fire resistance of: Tab 4: Critical Steel Temperature of 600°C for a fire resistance of:
A/V (m-1) 30 min 60 min 90 min 120 min 180 min 240 min A/V (m-1) 30 min 60 min 90  min 120 min 180 min 240 min
70 11 11 13 18 29 41 70 11 11 11 16 26 36
75 11 11 14 20 31 43 75 11 11 12 17 28 39
80 11 11 15 21 33 45 80 11 11 13 18 30 41
85 11 11 16 22 35 47 85 11 11 14 19 31 43
90 11 11 17 23 36 49 90 11 11 15 21 33 45
95 11 11 18 24 38 51 95 11 11 15 22 34 46
100 11 11 18 25 39 53 100 11 11 16 23 35 48
105 11 12 19 26 41 55 105 11 11 17 23 37 50
110 11 13 20 27 42 56 110 11 11 18 24 38 51
115 11 13 21 28 43 58 115 11 12 18 25 39 53
120 11 14 22 29 45  -  120 11 12 19 26 40 55
125 11 14 22 30 46  -  125 11 13 20 27 42 56
130 11 15 23 31 47  -  130 11 13 20 28 43 57
135 11 15 24 32 48  -  135 11 13 21 29 44  - 
140 11 16 24 33 49  -  140 11 14 22 29 45  - 
145 11 16 25 33 50  -  145 11 14 22 30 46  - 
150 12 17 25 34 51  -  150 12 15 23 31 47  - 
155 12 17 26 35 52  -  155 12 15 23 32 48  - 
160 12 18 27 36 53  -  160 12 16 24 32 49  - 
165 12 18 27 36 54  -  165 12 16 24 33 50  - 
170 12 19 28 37 55  -  170 12 17 25 34 51  - 
175 12 19 28 38 56  -  175 12 17 26 34 52  - 
180 12 19 29 38 57  -  180 12 17 26 35 53  - 
185 12 20 29 39 58  -  185 12 18 27 35 53  - 
190 12 20 30 40  -   -  190 12 18 27 36 54  - 
195 12 20 30 40  -   -  195 12 18 28 37 55  - 
200 12 21 31 41  -   -  200 12 19 28 37 56  - 
205 12 21 31 41  -   -  205 12 19 28 38 57  - 
210 12 22 32 42  -   -  210 12 19 28 38 57  - 
215 12 22 32 43  -   -  215 12 20 29 39 58  - 
220 12 22 33 43  -   -  220 12 20 30 40  -   - 
225 12 23 33 44  -   -  225 12 20 30 40  -   - 
230 12 23 34 44  -   -  230 12 21 31 41  -   - 
235 12 23 34 45  -   -  235 12 21 31 41  -   - 
240 13 23 34 45  -   -  240 12 21 31 42  -   - 
245 13 24 35 46  -   -  245 12 22 32 42  -   - 
250 13 24 35 46  -   -  250 12 22 32 43  -   - 
255 13 24 35 47  -   -  255 12 22 32 43  -   - 
260 13 24 36 47  -   -  260 12 22 33 43  -   - 
265 13 25 36 47  -   -  265 12 22 33 43  -   - 
270 13 25 36 48  -   -  270 12 23 33 44  -   - 
275 14 25 36 48  -   -  275 12 23 33 44  -   - 
280 14 25 37 48  -   -  280 12 23 34 44  -   - 
285 14 25 37 48  -   -  285 12 23 34 45  -   - 
290 14 26 37 49  -   -  290 12 23 34 45  -   - 
295 14 26 37 49  -   -  295 13 23 34 45  -   - 
300 14 26 38 49  -   -  300 13 24 34 45  -   - 
305 14 26 38 50  -   -  305 13 24 35 46  -   - 
310 14 26 38 50  -   -  310 13 24 35 46  -   - 
315 14 26 38 50  -   -  315 13 24 35 46  -   - 
320 15 26 38 50  -   -  320 13 24 35 46  -   - 

FIRE PROTECTION THICKNESS

The thickness of the fire protection for a given period of fire resistance in a cellulosic type fire, relates to the A/V ratio of a steel section. A/V is the ratio of the heated perimeter of the steel section exposed to fire to the cross-sectional area of the same steel section.

All column and beam sections have their own specific A/V ratio. Please consult Promat to establish the A/V ratio for a particular beam or column section. TABLES 1 to 4 ascertain the thickness of PROMASPRAY®-F3 that meets the required period of fire resistance for I-section and hollow section beams and columns.

For advice on thickness calculations for cellular beams, castellated sections, composite floors, upgrading of concrete slabs and more complex situations, please contact Promat.

Minimum thickness (mm) of PROMASPRAY®-F3 applied to I-section beams and columns


Tab 1: Critical Steel Temperature of 550°C for a fire resistance of: Tab 2: Critical Steel Temperature of 600°C for a fire resistance of:
A/V (m-1) 30 min 60 min 90 min 120 min 180 min 240 min A/V (m-1) 30 min 60 min 90  min 120 min 180 min 240 min
70 10 10 12 17 28 38 70 10 10 10 15 24 34
75 10 10 13 18 29 40 75 10 10 11 16 26 36
80 10 10 14 19 31 42 80 10 10 12 17 27 38
85 10 10 15 20 32 43 85 10 10 13 18 29 39
90 10 10 15 21 33 45 90 10 10 13 19 30 41
95 10 10 16 22 34 47 95 10 10 14 20 31 42
100 10 10 17 23 36 48 100 10 10 15 21 32 44
105 10 11 17 24 37 50 105 10 10 15 21 33 45
110 10 11 18 25 38 51 110 10 10 16 22 34 46
115 10 12 19 25 39 52 115 10 10 17 23 35 48
120 10 12 19 26 40 53 120 10 11 17 23 36 49
125 10 13 20 27 41 55 125 10 11 18 24 37 50
130 10 13 20 27 42 56 130 10 12 18 25 38 51
135 10 14 21 28 42 57 135 10 12 19 25 39 52
140 10 14 21 29 43 58 140 10 12 19 26 39 53
145 10 14 22 29 44  -  145 10 13 19 26 40 54
150 10 15 22 30 45  -  150 10 13 20 27 41 55
155 10 15 23 30 45  -  155 10 13 20 27 41 56
160 10 15 23 31 46  -  160 10 14 21 28 42 56
165 10 16 23 31 47  -  165 10 14 21 28 43 57
170 10 16 24 32 47  -  170 10 14 21 29 43 58
175 10 16 24 32 48  -  175 10 14 22 29 44  - 
180 10 16 24 32 49  -  180 10 15 22 30 45  - 
185 10 17 25 33 49  -  185 10 15 22 30 45  - 
190 10 17 25 33 50  -  190 10 15 23 30 46  - 
195 10 17 25 34 50  -  195 10 15 23 31 46  - 
200 10 17 26 34 51  -  200 10 16 23 31 47  - 
205 10 18 26 34 51  -  205 10 16 24 31 47  - 
210 10 18 26 35 52  -  210 10 16 24 32 48  - 
215 10 18 27 35 52  -  215 10 16 24 32 48  - 
220 10 18 27 35 53  -  220 10 16 24 32 48  - 
225 10 18 27 36 53  -  225 10 17 25 33 49  - 
230 10 19 27 36 53  -  230 10 17 25 33 49  - 
235 10 19 28 36 54  -  235 10 17 25 33 50  - 
240 10 19 28 37 54  -  240 10 17 25 34 50  - 
245 10 19 28 37 55  -  245 10 17 26 34 50  - 
250 10 19 28 37 55  -  250 10 17 26 34 51  - 
255 11 19 28 37 55  -  255 10 18 26 34 51  - 
260 11 20 29 38 56  -  260 10 18 26 35 51  - 
265 11 20 29 38 56  -  265 10 18 26 35 52  - 
270 11 20 29 38 56  -  270 10 18 27 35 52  - 
275 11 20 29 38 57  -  275 10 18 27 35 52  - 
280 11 20 29 39 57  -  280 10 18 27 36 53  - 
285 11 20 30 39 57  -  285 10 19 27 36 53  - 
290 11 21 30 39 58  -  290 10 19 27 36 53  - 
295 11 21 30 39 58  -  295 10 19 27 36 54  - 
300 11 21 30 39 58  -  300 10 19 28 36 54  - 
305 12 21 30 40 58  -  305 10 19 28 37 54  - 
310 12 21 30 40  -   -  310 10 19 28 37 54  - 
315 12 21 31 40  -   -  315 10 19 28 37 55  - 
320 12 21 31 40  -   -    320 11 19 28 37 55  - 

Minimum thickness (mm) of PROMASPRAY®-F3 applied to hollow section beams and columns

Tab 3: Critical Steel Temperature of 550°C for a fire resistance of: Tab 4: Critical Steel Temperature of 600°C for a fire resistance of:
A/V (m-1) 30 min 60 min 90 min 120 min 180 min 240 min A/V (m-1) 30 min 60 min 90  min 120 min 180 min 240 min
70 11 11 13 18 29 41 70 11 11 11 16 26 36
75 11 11 14 20 31 43 75 11 11 12 17 28 39
80 11 11 15 21 33 45 80 11 11 13 18 30 41
85 11 11 16 22 35 47 85 11 11 14 19 31 43
90 11 11 17 23 36 49 90 11 11 15 21 33 45
95 11 11 18 24 38 51 95 11 11 15 22 34 46
100 11 11 18 25 39 53 100 11 11 16 23 35 48
105 11 12 19 26 41 55 105 11 11 17 23 37 50
110 11 13 20 27 42 56 110 11 11 18 24 38 51
115 11 13 21 28 43 58 115 11 12 18 25 39 53
120 11 14 22 29 45  -  120 11 12 19 26 40 55
125 11 14 22 30 46  -  125 11 13 20 27 42 56
130 11 15 23 31 47  -  130 11 13 20 28 43 57
135 11 15 24 32 48  -  135 11 13 21 29 44  - 
140 11 16 24 33 49  -  140 11 14 22 29 45  - 
145 11 16 25 33 50  -  145 11 14 22 30 46  - 
150 12 17 25 34 51  -  150 12 15 23 31 47  - 
155 12 17 26 35 52  -  155 12 15 23 32 48  - 
160 12 18 27 36 53  -  160 12 16 24 32 49  - 
165 12 18 27 36 54  -  165 12 16 24 33 50  - 
170 12 19 28 37 55  -  170 12 17 25 34 51  - 
175 12 19 28 38 56  -  175 12 17 26 34 52  - 
180 12 19 29 38 57  -  180 12 17 26 35 53  - 
185 12 20 29 39 58  -  185 12 18 27 35 53  - 
190 12 20 30 40  -   -  190 12 18 27 36 54  - 
195 12 20 30 40  -   -  195 12 18 28 37 55  - 
200 12 21 31 41  -   -  200 12 19 28 37 56  - 
205 12 21 31 41  -   -  205 12 19 28 38 57  - 
210 12 22 32 42  -   -  210 12 19 28 38 57  - 
215 12 22 32 43  -   -  215 12 20 29 39 58  - 
220 12 22 33 43  -   -  220 12 20 30 40  -   - 
225 12 23 33 44  -   -  225 12 20 30 40  -   - 
230 12 23 34 44  -   -  230 12 21 31 41  -   - 
235 12 23 34 45  -   -  235 12 21 31 41  -   - 
240 13 23 34 45  -   -  240 12 21 31 42  -   - 
245 13 24 35 46  -   -  245 12 22 32 42  -   - 
250 13 24 35 46  -   -  250 12 22 32 43  -   - 
255 13 24 35 47  -   -  255 12 22 32 43  -   - 
260 13 24 36 47  -   -  260 12 22 33 43  -   - 
265 13 25 36 47  -   -  265 12 22 33 43  -   - 
270 13 25 36 48  -   -  270 12 23 33 44  -   - 
275 14 25 36 48  -   -  275 12 23 33 44  -   - 
280 14 25 37 48  -   -  280 12 23 34 44  -   - 
285 14 25 37 48  -   -  285 12 23 34 45  -   - 
290 14 26 37 49  -   -  290 12 23 34 45  -   - 
295 14 26 37 49  -   -  295 13 23 34 45  -   - 
300 14 26 38 49  -   -  300 13 24 34 45  -   - 
305 14 26 38 50  -   -  305 13 24 35 46  -   - 
310 14 26 38 50  -   -  310 13 24 35 46  -   - 
315 14 26 38 50  -   -  315 13 24 35 46  -   - 
320 15 26 38 50  -   -  320 13 24 35 46  -   - 
Additional Data
< #Back#

PACKAGING

12.5kg bags.

STORAGE

Off the ground and kept dry until ready for use.

SHELF LIFE

Maximum 12 months.

ENVIRONMENTAL

  • Do not discharge into drains, watercourses or soil. 
  • Not readily biodegradable. 
  • Not expected to bioaccumulate. 
  • Not expected to be toxic to aquatic life except at high concentrations.

PACKAGING

12.5kg bags.

STORAGE

Off the ground and kept dry until ready for use.

SHELF LIFE

Maximum 12 months.

ENVIRONMENTAL

  • Do not discharge into drains, watercourses or soil. 
  • Not readily biodegradable. 
  • Not expected to bioaccumulate. 
  • Not expected to be toxic to aquatic life except at high concentrations.
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Health & Safety
< #Back#

HEALTH & SAFETY

Adequate ventilation must be provided during use. Avoid contact with the skin and eyes by using eye protection, gloves, barrier cream and a face mask.

If the product comes into contact with the skin, wash immediately with soap and water. If the eyes are affected, flush with plenty of water and seek medical attention immediately.

A safety data sheet is available from Promat upon request.

Promat activities are conducted with due regard to all statutory requirements with appropriate safeguards against exposing employees and the public to health and safety risks.

HEALTH & SAFETY

Adequate ventilation must be provided during use. Avoid contact with the skin and eyes by using eye protection, gloves, barrier cream and a face mask.

If the product comes into contact with the skin, wash immediately with soap and water. If the eyes are affected, flush with plenty of water and seek medical attention immediately.

A safety data sheet is available from Promat upon request.

Promat activities are conducted with due regard to all statutory requirements with appropriate safeguards against exposing employees and the public to health and safety risks.