MONOLUX®

ADVANTAGES

  • Low thermal conductivity
  • High mechanical strength
  • Resistance to moisture and chemicals
  • Excellent machinability to close tolerances
  • Tough and durable
  • Dust free surface
  • Asbestos free

Structural Calcium Silicates

MONOLUX® materials are rigid insulation boards with a low thermal conductivity. They are specifically formulated without asbestos and mineral fibres. MONOLUX® products have low shrinkage and high strength and therefore provide effective and stable insulation solutions for industrial applications

MONOLUX® boards are strong rigid insulation boards ideally suited for applications where good insulation values and high mechanical resistance are required.

Technical Data
< #Back#
MONOLUX®
Classification temperature°C
1000
Bulk densitykg/m3
950
Shrinkage@CT – 12h full soak, %
0.8
Thermal conductivity@600 °C mean, W/m.K
0.25
Compressive strength(ASTM C 165), N/mm2 27
MONOLUX®
Classification temperature°C
1000
Bulk densitykg/m3
950
Shrinkage@CT – 12h full soak, %
0.8
Thermal conductivity@600 °C mean, W/m.K
0.25
Compressive strength(ASTM C 165), N/mm2 27
Dimensions & Size Availability
< #Back#
Length mm
2500
Width mm
1200
Thickness mm 12.7, 25, 30, 40, 50, 60

Other sizes and shaped parts are available on request.
Length mm
2500
Width mm
1200
Thickness mm 12.7, 25, 30, 40, 50, 60

Other sizes and shaped parts are available on request.
Production Tolerances
< #Back#
Length mm
± 1.0
Width mm
± 1.0
Thickness mm ± 0.4
Length mm
± 1.0
Width mm
± 1.0
Thickness mm ± 0.4
Working & Processing
< #Back#
MONOLUX® products can be accurately machined with special processing machinery and appropriate equipped tools. The fine material structure allows the production of precision machined parts. They can be easily fixed in place by screws or Tucker Fasteners. When using screws, slot holes should be included. 

When cutting to size, the maximum recommended workplace concentration for dust generation must be observed. We advise local dust extraction in the cutting zone.
MONOLUX® products can be accurately machined with special processing machinery and appropriate equipped tools. The fine material structure allows the production of precision machined parts. They can be easily fixed in place by screws or Tucker Fasteners. When using screws, slot holes should be included. 

When cutting to size, the maximum recommended workplace concentration for dust generation must be observed. We advise local dust extraction in the cutting zone.
Typical Applications
< #Back#
MONOLUX® materials are used in various applications:

  • Platen press insulation
  • Load bearing pipe supports
  • Heat shields
  • Structural thermal breaks
  • Furnace bottom boards
MONOLUX® materials are used in various applications:

  • Platen press insulation
  • Load bearing pipe supports
  • Heat shields
  • Structural thermal breaks
  • Furnace bottom boards
Documents
< #Back#

Products Data Sheet

Products Data Sheet

Products Data Sheet

Products Data Sheet